For email updates with news & info


Phone: 0800 33 999 33
Email: Click here

Installation Guide

EZ Street Cold Asphalt is easier to install than hot mix. Installation requires a simple, three-step process:

Remove loose material by raking or sweeping. A solid base ensures adherence (water, however, does not need to be drained).
Holes and crevasses can be filled - in 50 mm lifts - with EZ Street Cold Asphalt, compacted properly (see next step). Perform this step in layers if holes are deeper than 50 mm.
Use of a vibrating plate compactor is most effective, but not necessary (a hand tamper will suffice). The goal is to achieve total solidity with the existing pavement. If there will be no secondary compaction from traffic, you are advised to employ extra compaction.

That's all. Some crews toss sand on patches, but that is entirely optional. EZ Street Cold Asphalt, when installed correctly, will not adhere to shoes or automobile tires.

Whether it is to repair potholes, driveways, provide road reinstatements or overlays, your work has never been easier than on EZ Street.

Fultan Hogan
Pothole Repair Experts -
EZ STREET New Zealand

Copyright 2015 :: The EZ Street Company :: All rights reserved. :: Permanent Pothole Repair
EZ STREET® is a registered trademark of The EZ Street Company.